FREE SHIPPING ON ORDERS OVER $1000*
* Excludes certain products - Only available for purchases of $1000 or More
5% OFF ANY ORDER Use Code: SUPER5OFF
Baseball Softball Field LED Lighting System 200' Field 50/30 6 poles 20 fixtures with Controls
Baseball Softball Field LED Lighting System 200' Field 50/30 6 poles 20 fixtures with Controls
This complete sports LED lighting package is designed for both recreational and competitive softball or baseball field with 300' fence lines. The package can be modified to include only fixtures and mounts to upgrade any existing field. The high powered LEDs reduce the size of the pole needed and increase uniformity on the field. The instant on/off of LED eliminates costly warm-up periods and turns back on immediately following a power outage. This will keep games on schedule and reduce costs. The Smart Control system eliminates the need for a field supervisor, reducing long term costs.
Design: This package achieves a 55.4/35.8 foot-candle average and uniformity at 1.47/1.79 for Infield Outfield. The recommended range is 50/30 and <2.0/2.5.
Optional items:
1. 480v ballast (remote with option 3 or 4)
2. Pole mounted enclosures with wireless relay for controlled pole startup
3. Pole mounted enclosures with wireless relay for controlled pole startup, and remote ballasts
4. Pole mounted enclosures with wireless relay for controlled pole startup, remote ballasts and remote capability for off-site control via app
5. On-Site Startup by Factory Technician
6. Stamped Engineered Pole Calcs
7. Stamped Engineered Footing Drawings (Geotech required by other)
Package Includes:
20 units of 1000 watt StadiaLux, Custom Designed Optics, Mounting Bracket, Powder Coat Finish.
6 units 50' round tapered steel pole with post top cap, and mounting arms with tenons, anchor bolts, templates, and base covers
6 units of Pole Mounted Enclosures (Optional)
Lighting Package Features
- Estimated lifetime use is roughly 91.2 years with zero maintenance
- Guaranteed 50/30 levels for 30 years (based on <1,000 hrs/year)
- Instant-on/off, Instant Restrike
- Cuts typical energy use by roughly 45% (39600 watts vs 72600 watts)
- Level control can further increase rated life by reducing maximum output settings thereby diminishing degradation factor
Wireless Control System (Optional):
- Remote Scheduling
- Level Control with Dimming
- System management and custom reporting
- On-Site training and setup included
*Every project we list online was designed for somebody. We can make you a custom field package.
Inquiries will receive custom-designed field layout free, calculations, spec sheets, and detailed quotes. This is a free service
*Upon purchase detailed drawings, including angular sets, aiming diagrams, precise pole placement, and optic information will be given. Wind load data for permitting will also be provided.
Baseball Softball Field LED Lighting System 200ft Field 50/30 6 poles 20 fixtures with Controls
Description: Stadialux is a precision high powered LED luminaire that is compatible with dimming systems of all types. The fixture can be configured with varied CRI values increasing for high-end television lighting needs.
Specifications:
• Rated life: Over 100,000 hrs.
• Rating: Light engines rated IP66, Luminaire rated IP65
• Color Rendering Index (CRI): 74 (optional CRI 80 available)
• Operating temp: -31 –165°F
• Power factor: >95%
• Input line voltage: 120-277v or 480v (optional)
• Input line frequency: 50/60 Hz
• Surge protection device: UL 1449/ANSI C62.41.2 Category C, 10kA/10Kv
• Dimmable: 0-10V, Dali, or DMX
Warranty
• 5 yr. LED board and 5 yr. driver
Misc Specs
• Finish: Powder coated (black/white/gray)
Pole Features:
Design The selection of the correct pole design is predicated on the specific loading requirements of each application. The poles located in the steel pole chart are designed to withstand dead loads and theoretical dynamic loads developed by sustained winds of 80 MPH through 110 MPH times the 1.3 gust factor. The combined EPA and the weight of the luminaire, light support brackets, platforms, and any other attachments cannot exceed the rated EPA or allowable weight of that pole.
Welding All welds shall be of the highest quality and performed by American Welding Society certified welders conforming to the latest version of the American Welding Society specification AWS D1.1.
Finish All poles, mounting brackets, and platforms are furnished with a coating of either red oxide/zinc primer, factory painted, powder-coated or hot-dip galvanized to ASTM A-123. Miscellaneous hardware will be galvanized to ASTM A-153. Exterior finish coatings are available by request.
Pole Shaft The steel pole shall consist of the appropriate number of pole sections, either round or multi-sided, for heights up to 120 feet. Each section shall be fabricated from high strength low alloy steel conforming to ASTM A-572, with a minimum yield strength of 55,000 psi. These shafts shall telescope over each other to match the overall desired pole height. The overlap telescoping joint shall have a length that is the larger of 2 feet or 1-1/2 times the diameter of the inside of the female tube. The sections shall be pre-fitted and match marked at the factory. All sections shall maintain a uniform taper from top to bottom. There shall be at least one longitudinal seam weld in the tapered section of the shaft. The longitudinal seam weld shall have at least 60% penetration, except in the areas where the shaft section telescopes over another. In overlapping areas, the weld penetration shall be 100%. No circumferential weld splices may be used in fabricating the shafts.
Base Plate The base plate is fabricated from a structural quality hot rolled carbon steel plate that meets or exceeds ASTM A-36 with a minimum yield of strength of 42,000 psi. The base plate shall telescope the pole shaft and have a circumferential weld on the top and bottom or shall have a full penetration butt weld with a backup bar. The anchor bolt holes shall be slotted and will be a minimum 1/4” larger than the diameter of the anchor bolts used on the pole.
Hand Hole An oval reinforced handhole, having a nominal 4” x 6” x .25” wall, will be installed 18” above the base plate. A hand hole cover and attaching hardware is included with each hand hole assembly. A ground lug will be welded inside the pole opposite the hand hole. This is standard on all poles unless otherwise specified. An additional access hole is noted where bracket assembly connects.
Anchor Bolts Anchor bolts are fabricated from a commercial quality hot-rolled carbon steel bar that meets or exceeds the minimum yield strength of 55,000 psi. Anchor bolts are sized according to each pole design and are furnished with 2 galvanized heavy hex nuts and 2 galvanized flat washers. Anchor bolts shall be galvanized a minimum of 6 inches on the threaded end in accordance with ASTM A-153. Anchor bolts will ship with the poles unless otherwise noted.
Pole Top Each pole will be provided with either a removable pole cap, flat plate, or 2 3/8” O.D. x 5” tenon top (other sizes available).
| Part Number | Ballfield-200-LED |
|---|---|
| Manufacturer | LD |
| Watts | 1000 Watts |
| Lumens | 116,000 |
| Input Voltage | 120V-277V, 480V |
| Warranty | 5 Year |
| Certifications |          |
| Specification Sheet | |
| Lead Time | Build Item 8+ Weeks |
Free Shipping
ON ORDERS OVER $1000 ONLY
5% off your order
USE CODE: SUPER5OFF
Online Support
Chat with a lighting expert.
