LSI CRUS SM Scottsdale Legacy Surface Mount Canopy Fixture

Construction
• Features a ultra-slim 11/16” profile die-cast housing, with flat clear tempered glass lens attached to a die formed steel adaptor panel. Unit is water-resistant, sealed and IP66 rated.
• Standard color is white and is finished with LSI’s DuraGrip® polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling.
• Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.

Optical System
• Features an array of select, mid-power, high brightness, high efficiency LED; 3000K, 4000K, 5000K color temperature, 80 CRI (nominal).
• Symmetric distribution provides a uniform distribution.
• Six Lumen Packages: 5,000, 9,000, 10,000, 13,000, 18,000 and 22,000 Lumens.

Electrical
• High performance factory programmable driver features over-voltage, under voltage, short-circuit and over temperature protection with integral 6kV surge protection that meets IEEE C62.41.2 and ANSI C82.77-5 Location Category C Low standards. 
• Additional field replaceable 10kV surge protection device meets a minimum Category C Low operation (per ANSI/ IEEE C62.41.2). Custom lumen and wattage packages available.
• Driver components are fully encased in potting for moisture resistance. Complies with IEC and FCC standards. 0-10 V dimming supplied standard with all drive currents.
• Universal voltage power supply, 120-277 VAC, 50/60 HZ and 347-480 VAC, 50/60 HZ input.
• -40°C to 55°C (-40°F to 131°F) ambient operating temperature. (Varies based on lumen package and mounting style see performance data for specifics.)
• Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location (see performance data for specifics.)