LSI Pole Builder for Steel Round Straight Poles

POLE SHAFT - Pole shaft is electro-welded ASTM-A500 Grade C steel tubing with a minimum yield strength of 46,000 psi. On Tenon Mount steel poles, tenon is highstrength pipe. Tenon N option is 2-3/8” O.D. x 4-3/4” tall. Tenon 4N option is 4” O.D. x 4-7/8” tall. Steel round poles are 4” and 5” in diameter.

HAND-HOLE - Standard hand-hole location is 12” above pole base. Poles 18’ and above have a 3” x 6” reinforced hand-hole. Shorter poles have 2” x 4” non-reinforced handhole.

BASE - Pole base is ASTM-A36 hot-rolled steel plate with a minimum yield strength of 36,000 psi. Two-piece square base cover is optional.

BASE COVERS- Optional two-piece decorative die-cast aluminum (GBC) base covers or square two-piece aluminum base covers are available.

ANCHOR BOLTS - Poles are furnished with anchor bolts featuring zinc-plated double nuts and washers. Galvanized anchor bolts are optional. Anchor bolts conform to ASTM F 1554- 07a Grade 55 with a minimum yield strength of 55,000 psi. GROUND LUG - Ground lug is standard.

DUPLEX RECEPTACLE - Weatherproof duplex receptacle is optional.

GROUND FAULT CIRCUIT INTERRUPTER - Self-testing ground fault circuit interrupter is optional.

FINISHES - Each pole is finished with DuraGrip®, LSI’s baked-on polyester-powder finishing process which electrostatically applies and fuses a polyester powder to the pole. Provides an extremely smooth and uniform finish to withstand extreme weather changes without cracking or peeling, and features a five-year limited warranty. Optional DuraGrip® Plus features the added protection of a 3.0 to 5.0 mil thickness of polyesterpowder finish plus an inner coating, as well as a seven-year limited warranty.